The New A30 V2 series motors are designed for Larger Parkflyers, 90mm EDF, and high speed models and Helicopters using 2 to 5 series LiPoly batteries.

They now feature a new rotor cooling design with an integral cooling system, as well as better stator effiency design. The A30-10L V2 is designed for 30 to 45 oz. 3D-Aerobatic and Scale models with 2-3 cell LiPoly batteries. This 14 pole, Outrunner design creates MASSIVE TORQUE, therefore larger direct drive props can be used without the need for a gearbox. This motor features Oversize bearings, Curved Neo-magnets, and a High Efficiency stator design. These motors produce more power with lower current consumption than other popular Outrunner designs!

Technical Data:

WARNING: Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.