The Super Sniper 90mm ARF has a fiberglass fuselage and stabilizer with balsa foam sheeted wings. Decals, retract landing gear formers installed in the wing and former included for nose gear, and wheels are included.

SPECIFICATIONS:

• Length :47 inches/ 1200mm
• Span : 44 inches/ 1120mm
• Flying Weight : 4.8 to 5.7 pounds/ 2200-2600 g

BUILDERS NOTE: REFER TO THE "ELECTRIC SETUP GUIDELINE" ON THE HOME PAGE TO HELP DETERMINE THE PROPER SET UP FOR FAN, ESC, MOTOR AND BATTERY.

ITEMS NEEDED FOR COMPLETION:

• Motor: HET 600/700 Series brushless motor
• EDF fan unit : Schubeler DS-51, HET 9305 fan unit or Wemotec minifan
• Brushless ESC
• Micro servos : 4-5 micro digital servos (5th Servo for nose gear)
• 2x 18" Servo Extensions
• 2x 24" Servo Extension
• 1x Deans Connectors
• 2x 3s 3300 mAh or higher Li-Po run in series
• 1x 3" "Y" Servo Connector
• 1x 3.5 Gilt Connector
• 2x 1' 12g Red Silicone Wire
• 2x 1' 12g Blk Silicone Wire

Optional Rudder feature: Involves servo installation in fin. An additional servo will be needed for this feature.

BEC Required-Recommended BEC from Castle Creations