The HET Phantom F-4 ARF features a Lite ply and balsa fuselage, balsa covered foam wings, and Oracover covering. All parts are laser cut and it has a clear canopy. The decal set included matches scheme. Photo illustrated instructions are included.

BUILDERS NOTE: REFER TO THE "ELECTRIC SETUP GUIDELINE" ON THE HOME PAGE TO HELP DETERMINE THE PROPER SET UP FOR FAN, ESC, MOTOR AND BATTERY.

ITEMS NEEDED FOR COMPLETION:

• 2x HET-RC EDF6904 or Wemotec Mini Fan
• 2x Typhoon EDF motors 2W, 3W, 4W or 2W-20
• 2x Electronis Speed Controller
• 4 Channel radio
• 3-4 micro servos (4th Servo for retracts)
• 5x 18" Servo Extensions
• 12" Servo Extension (Optional for retracts)
• 2x Deans Connectors
• 2x 4s 3700 mAh 25c Li-Po or higher
• Retract Landing Gear (Optional)
• 2x 3.5 Gilt Connectors
• 3x 1' 12g Silicone Wire Red
• 3x 1' 12g Silicone Wire Blk
• 3" "Y" Servo Connector

SPECIFICATIONS:

• Wingspan: 31.8 in./ 808mm
• Length: 48.1 in./ 1221mm
• Weight: 3.5 to 4.5 lbs./ 1596-2000g