High End Technology's ME 163 ARF is a true bullet of an airplane.  This plane is capable of flying at 160 mph and full filling the need for speed.

The ME 163 features a composite fusalage and foam core, balsa sheeted wings.

One of the most unusual aircraft during World War II. The ME 163 offers classic lines and ballistic flight speed. This edf jet flies extremely fast and is for the veteran edf flyer. The HET ME 163 features an instruction manual on a cd.

SPECIFICATIONS:

• Wingspan: 36 in/ 920 mm
• Weight: 20 oz to 42 oz. / 580 to 1200 grams
• Length: 26 in/ 670 mm
• Fiberglass fuselage
• Decal set
• Balsa foam sheeted wings
• Hardware package included

BUILDERS NOTE: REFER TO THE "ELECTRIC SETUP GUIDELINE" ON THE HOME PAGE TO HELP DETERMINE THE PROPER SET UP FOR FAN, ESC, MOTOR AND BATTERY.

MOTORS and ESCs THAT CAN BE USED

MOTOR ESC power LIPO Propeller

4W: 3 cells, 40 amps, 333 watts, 1800Mah 25C-2200 25C, 5.5 X4.2 APC or graupner

2w-20: 3 cells, 65amps, 660 watts, 2200Mah 35C-2500 25C, 4.7X4.7 APC or graupner

1W30: 3 cells, 120 amps, 1165 watts, 3000 Mah 35C-4200 25C, 4.7X4.7 APC or graupner

ITEMS NEEDED FOR COMPLETION:

• 30 mm Metal Spinner with 4.75x4.75 or 5x5 propeller
• Brushless Motor: 2w, 3w, 4w, 2W-20 will make the 163 reach 160 mph on a 4s 30c li-po.
• Electronic Speed Control
• 30mm Aluminum Spinner w/ APC prop
• Servos: 2 micro servos for elevon operation
• Li-Po Battery: 3-4 cell depending on motor selected
• Battery and Gilt Connectors
• CA and Epoxy glues
• 2x 8 in Servo Extensions
• Transmitter and receiver that has delta mixing.