Fan Jets USA Thrust Tube 100-120mm EDF's
Fan Jets USA offers this clear sheet to be used as a thrust tube on all edf jets in the 100-120mm edf size. When setting up the thrust tube, the exhaust opening needs to be 75-80% of the diameter of the edf unit. Any more or less than this will result in loss of the thrust output. The tube should have a 1/2 inch overlap on the edges. Clear packing tape can be used to tape the overlap and seal it from the airflow.
- Thick duralar material
- Size: 20 Inches long, 17 Inches wide
- Thickness: 0.005"
- Easy to cut, tape and attach to fan units inside thrust tubes
If a thrust tube needs to be longer than 20 inches, then a second tube needs to be purshased and then put end over end in the fuse of the jet.