E-Flite BAe Hawk 15 DF ARF

E-Flite BAe Hawk 15 DF ARF
Click To Enlarge
  • Item #: EFL8025
  • Manufacturer: E-Flite
  * Marked fields are required.
Qty*
Price $149.99
Availability In-Stock

Designed as a trainer and light combat aircraft for use by the British Royal Air Force, the British Aerospace (BAe) Hawk was mainly used to teach air combat, air-to-air firing, air-to-ground firing, low-altitude flying techniques and operation procedures. There are currently over 900 Hawks in operation and nearly 2 million flying hours have been logged on the Hawk.

E-flites BAe Hawk 15 DF ARF is a sport scale version of the British trainer. Constructed of fiberglass and balsa, the fuselage is prefinished with scale details. The Hawk boasts the rare and very visible Central Flying School airshow trim scheme from 1987 in red, white and blue.

This exciting model was designed around E-flites Delta V 15 (69mm) fan unit and matched 15 DF brushless motor. Pilots can use a 3-cell battery pack or utilize a 4-cell battery pack for increased vertical performance. The built-in fan mounts make installing the fan easy. Just drop in the fan unit and tighten four screws. The removable front hatch also allows easy access to the radio equipment and battery. The entire trim scheme is prepainted, pre-trimmed, the wings are covered in UltraCote and all the decals have already been applied. Created for the advanced sport scale pilot, the BAe Hawk 15 DF ARF easily lives up to its reputation of being a stable flying jet.

KEY FEATURES:

  • Molded fiberglass fuselage
  • Built-up balsa wing construction
  • Pre-finished scale trim scheme of Central Flying School RAF BAe Hawk
  • Preassembled quick access cockpit hatch
  • Built-in fan mounts
  • Removable landing gear
  • Concealed elevator linkages
  • Designed to fit the E-flite Delta-V 15 EDF unit and BL15 DF Brushless Motor
  • Optional pilot figures sold separately

BUILDERS NOTE: REFER TO THE "ELECTRIC SETUP GUIDELINE" ON THE HOME PAGE TO HELP DETERMINE THE PROPER SET UP FOR FAN, ESC, MOTOR AND BATTERY.

REQUIRED ITEMS FOR COMPLETION:

  • 3 Micro Servos required with an optional 4th for steering.
  • 3 12" Servo Extension
  • 3" "Y" Splitter
  • Deans Connector
  • 3 Hitec HS-65 servos (Optional 4th for steering)
  • 3s 3300 mAh Outrage Li-Po Battery
  • Tsunami 72 amp ESC
  • 3.5 Gilt Connectors

TECHNICAL DATA:

Delta-V fan with BL 15 Brushless Motor, E-Flite Pro Brushless ESC, Outrage 4S 3200 mAh 30C Li-Po produces 57 continous amps and 793 watts of output.

Required Items